Facts: protection during pushovers or fallshelps, when tying up the motorcyclevehicle specific design for perfect match and easy installationtough Tube-in-Tube constructionpremium high quality metal coating in black, anthracite, silver or white, or high gloss chrome plating: depends on bikecomplete set of right/left side incl. mounting material and manual

The black C-Bow side carriers from Hepco&Becker provide a sturdy solution for attaching Hepco&Becker C-Bow side bags and cases to your KTM 125 Duke (2017-). These carriers are distinguished by their high-quality surface finish. Please note that conventional Hepco&Becker hard cases like the Junior or Journey are not compatible with these C-Bow carriers. Similarly, Krauser K-Wing cases are not suitable for use with these carriers. The recommended load capacity is 5 kg per bag or case. Always refer to the installation manual, model-specific guidelines, and the recommendations of the motorcycle manufacturer. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. Pay attention to the included installation instructions or model-specific guidelines. It is important to note that luggage bridge extensions may affect the bag attachment to the carrier. These carriers do not require an ABE (General Operating Permit) or registration in the vehicle papers. The delivery includes both the left and right carriers, a detailed installation manual, and the mounting kit. The C-Bow side carriers are designed for the stock condition of your machine and have not been specifically tested with accessories such as exhaust systems, license plate holders, or other turn signals. Please be aware that when using aftermarket accessories, there should be a sufficient distance from exhaust systems and the correct orientation of the turn signals to keep the exhaust away from the bags.

Facts: protection during pushovers or fallshelps, when tying up the motorcyclevehicle specific design for perfect match and easy installationtough Tube-in-Tube constructionpremium high quality metal coating in black, anthracite, silver or white, or high gloss chrome plating: depends on bikecomplete set of right/left side incl. mounting material and manual

Enhance your KTM 125 Duke (2017-) with the Mini Rack Soft Luggage Rear Carrier in sleek black. This solution by Hepco&Becker offers you a slim, lightweight, and unobtrusive way to transport your luggage. The Mini Rack gives you the opportunity to individually attach soft luggage to the rear of your motorcycle, while the lateral slots allow for secure fastening of backpacks or bags. With a recommended load capacity of 3-5 kg, the Mini Rack is perfectly equipped for your rides. Please make sure to consider the vehicle-specific guidelines, the included installation manual, and the motorcycle manufacturer's recommendations to make the most of your tours. Keep in mind that the Mini Rack is not suitable for top cases. No additional ABE or registration is required for the Mini Rack, allowing you to fully concentrate on your ride. The high-quality powder coating protects against the elements and gives the Mini Rack an appealing appearance. This robust construction is manufactured in Germany and represents the best in terms of quality and craftsmanship. Experience the fusion of minimalist design and high functionality. With the Mini Rack Soft Luggage Rear Carrier, a new world of convenience and flexibility opens up for you and your KTM 125 Duke (2017-). This accessory gives your motorcycle a versatile character for all your adventures. An invitation to explore the roads without compromising on style and utility. Your next adventure starts here.

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

The black Easyrack top case carrier has been specifically designed for the KTM 125 Duke models from 2017 onwards. This carrier allows you to create additional storage space on your motorcycle. It consists of a model-specific installation kit and an Easyrack adapter plate, allowing you to mount Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The design of the Easyrack harmoniously integrates into the appearance of your KTM 125 Duke. The combination of high-quality aluminum and a sturdy steel base ensures not only durability but also an appealing look. Additional attachment points in the design allow for secure mounting of luggage rolls or other accessories. Included in the package are the model-specific carrier, an installation kit, and a detailed installation manual. No additional adapters are required to securely mount Hepco&Becker top cases or soft luggage. The functionality of the Easyrack is technically the same as the Alurack top case carrier. The difference is that the bracket for attaching the top case on the Easyrack can be folded down when not in use, while the bracket on the Alurack remains in an upright position. The model-specific base carrier of the Easyrack corresponds to that of the Alurack, allowing for easy installation. The luggage carrier is exempt from ABE or registration requirements and complies with all relevant legal regulations. The recommended load capacity is 5 kg. Please follow the specific instructions in the installation manual and the recommendations of the motorcycle manufacturer to ensure your safety. It is recommended to transport heavy luggage preferably in a top case or a backpack to maintain the stability and balance of your motorcycle. The recommended maximum speed is 130 km/h to ensure optimal performance and safety. The Easyrack top case carrier has been specifically designed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other turn signals.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Facts: protection during pushovers or fallshelps, when tying up the motorcyclevehicle specific design for perfect match and easy installationtough Tube-in-Tube constructionpremium high quality metal coating in black, anthracite, silver or white, or high gloss chrome plating: depends on bikecomplete set of right/left side incl. mounting material and manual

You ride the nimble KTM 125 Duke (model year 2017 and newer) and want practical solutions for your everyday adventures or longer journeys? Here, we present the black Alurack top case carrier – the ideal combination of form and function. This set includes a special installation kit and an Alurack adapter plate to securely attach Hepco&Becker top cases or soft luggage. The Alurack top case carrier is specifically tailored to your model and seamlessly integrates into the harmonious overall appearance of your KTM 125 Duke. By using high-quality aluminum in combination with a sturdy steel base carrier, the Alurack not only offers high strength but also an aesthetically pleasing look. Additional mounting points are integrated into the design to allow for the attachment of luggage straps to securely fasten luggage rolls or equipment. The carrier is made up of a robust steel base construction and an aluminum carrier plate that ensures stability and durability. Included in the package are the tailored Alurack top case carrier, the installation kit, and an easily comprehensible assembly manual. No additional adapters for top case mounting are required. The high-quality surface finish not only gives the Alurack an appealing look but also emphasizes its premium character. The technical functioning of the Alurack top case carrier is similar to that of the Easyrack top case carrier. The difference lies in the fact that the bracket for top case attachment is fixed upwards and cannot be folded down. The model-specific base carrier is identical for both Easyrack and Alurack. To mount the Hepco&Becker Alu Standard Top Case 35, a special bracket is required, which replaces the regular Alurack bracket (item number: 700007350 or 700007351). The luggage carrier does not require a General Operating Permit (ABE) or registration. The recommended maximum payload is 5 kg (please heed model-specific instructions, the assembly manual, and the motorcycle manufacturer's information). Heavy luggage should generally be transported in the side cases or tank bag, not in the top case. The recommended maximum speed for the Alurack top case carrier is 130 km/h. Please note that the carrier was designed for the motorcycle's stock condition and has not been tested with accessories such as exhaust systems, license plate holders, or other indicators.

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.