KTM 1090 Adventure R Accessories

Here you will find model-specific products and accessories for KTM 1090 Adventure R (2017-2018).
Depending on availability for your bike – you can find the following example products and more here:

C-Bow carrier & luggage Sidecarrier for your 1090 Adventure R
Protection & Crash bars for KTM 1090 Adventure R
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting ring for a tank bag for 1090 Adventure R

As well as many other comfort and accessory items for your Motorcycle!
Compatible Panniers, Topcases, Tankbags etc. are also linked as related products for their relative carriers.

Handlebar riser with offset for KTM 1090 Adventure R (2017-2018)

With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorbike to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorbike. simple installationNaturally TÜV-tested and incl. ABEhigh qualityvarious designs depending on the model: Distances or sleeves under the handlebar clamps; handlebar risers under the handlebars for use with original upper clamp; handlebar risers with lower and upper clamps

From £73.72*

Details

Handlebar riser for KTM 1090 Adventure R (2017-2018)

From £52.03*

Details

Engine protection plate aluminium for KTM 1090 Adventure R (2017-2018)

Motorbike underride guard: engine protection plate for KTM 1090 Adventure R (2017-2018), silver Even a pavement can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Our engine protection plates protect the manifold and engine block from impacts and stone chipping, even with the heaviest ground contact. With our underride guard for 1090 Adventure R, you not only upgrade your motorbike in terms of safety, but also automatically give it a certain off-road look. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminium, our Hepco&Becker engine protection plate allows enough air to pass through for cooling thanks to its special shape and is naturally angled, so that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. It enhances the look of your motorbike and is guaranteed never to let you down Features & important details: Material: High-strength aluminium, made in Germany Surface finish: Brushed, anodised Colour: Silver anodisedFor model year(s): 2017-2018Provides additional protection for sensitive parts on the manifold and engine block Scope of delivery: Engine protection plate for KTM 1090 Adventure RMounting material / screw set Illustrated installation instructions (DE / EN) Important notes: No ABE or registration is required for this product if fitted as intended Please observe the fitting instructions and model-specific information to determine whether there may be any restrictions. Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! Restrictions may apply to original parts or accessories that have already been fitted; these can be found in the fitting instructions.

£259.73*

Set of protective hoop bags V1 - *Universal version*

Additional luggage space on the engine and tank protection bars for items that no longer fit in the tank bag but still need to be within reach. Simply slide it onto the mudguard and attach it securely to the bracket using the full-surface Velcro fastening. for universal attachment to engine and petrol tank guards extremely high dimensional stability low weight abrasion-resistant coating water-repellent and incl. small waterproof inner pocket lockable 2-way zip Recommended max. speed: 130 km/h (please observe the service information on the bag and the motorbike-specific manufacturer's specifications) Luggage systems generally do not require an ABE or registration

£125.32*

Grip guard for KTM 1090 Adventure R (2017-2018) set, black (left + right)

Grip guard for KTM 1090 Adventure R from Hepco&Becker The Hepco&Becker grip guard guarantees reliable protection for the rider's hands and the motorbike handlebars both when riding off-road and on asphalt. Model-specific hand protector guard for your KTM 1090 Adventure R - Tubular steel construction precisely customised to your motorbike for the perfect look. Ideal for all Adventure bikes to stabilise the hand protectors and protect them from breakage in the event of a crash or contact with a large branch, for example! Reliable, robust protection for the handlebar fittings in the event of a crash with optimum aerodynamics. As individual as you are - make it your bike! Details & features: Material: Tubular steel, made in Germany Surface finish: High-quality, colour-matching powder coating Colour: black For model years: 2017-2018 Scope of delivery: 1 set of grip guards (left & right) Complete set of mounting material Bilingual, illustrated assembly instructions Important notes: The plastic hand protectors shown in the pictures are part of the delivery condition of the motorbike, they are NOT included! Please observe the model-specific information listed in the fitting instructions and the features! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! May not fit in combination with non-original handlebar clamps, e.g. with comfort handlebars or handlebar risers! For safety reasons, all protective bars should be adequately checked after a fall and replaced if necessary.

£151.77*

Black lamp guard grille for KTM 1090 Adventure R (2017-2018)

Our Hepco&Becker lamp guard protects the headlight in many cases and also gives your bike the proper off-road look.adapted to the design of the motorbikeeffective protectionno reflections or danger from glaresimple mounting on mostly existing screw pointssolid construction made from German steelrobust and high-quality coatingmade in Germany without TÜV

£99.30*

Side stand plate silver/black for KTM 1090 Adventure R (2017-2018)

Side stand extension KTM 1090 Adventure R (2017-2018) For widening the contact surface of the side stand - for absolutely secure standing on gravel, sand, dirt, etc. Quick and easy to install, made from high-quality CNC-milled aluminium with a powder-coated steel counter bracket - Made in Germany. Especially when fully loaded or on unpaved surfaces, the motorbike on the side stand can easily sink and tip over. To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker. The side stand support is enlarged to approximately double the surface area compared to the original stand, so your 1090 Adventure R is perfectly protected against accidents when parking. Material: Aluminium & powder-coated steel Colour: silver / black Model-specific development for the KTM 1090 Adventure R For model year(s): 2017, 2018 Effective protection when parking Quick and easy installation with just a few screws ABE & registration free

£51.60*

BASIC tank ring incl. tank bag closure unit for KTM 1090 Adventure R (2017-2018)

Basic tank ring for KTM 1090 Adventure R (2017-2018)Simple and innovative at the same time - our BASIC tank ring This functional tank ring enables the attachment of a Hepco&Becker tank bag.The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag for KTM 1090 Adventure R (2017-2018) and you have everything you need. Each model-specific tank ring is stored in the "My Bike" database for the respective motorbike model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed No ABE or registration is required for this product when fitted as intended Recommended maximum speed when the tank bag is fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Please observe the motorbike manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remain the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centring. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Further information: A tank bag with Lock-it counterholder cannot be fitted to a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.

£32.95*

Lock-it black side pannier rack for KTM 1090 Adventure R (2017-2018)

The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and customised laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with our lockable Lock-it screws.All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks.stable construction MADE IN GERMANYquickly removable, only inconspicuous small tabs remain on the motorbikehigh-quality surface finishgenerally easy to fit, please refer to the assembly instructions providedScope of delivery: right + left incl. mounting material and installation instructionsplease refer to the vehicle-specific information or the installation instructions to determine whether there are any restrictionsSuitable for most Hepco&Becker hard-shell side cases (please note model-specific information)Luggage systems generally do not require an ABE or registrationTube diameter: 16 mm

£311.77*

Side case carrier cutout for Xplorer cutout case 40/37 for KTM 1090 Adventure R (2017-2018)

Side pannier rack cutout for KTM 1090 Adventure R (2017-2018)Features Motorbike luggage carrier:adventure-compatible, weather-resistant and bolted stainless steel pannier rackblasted and electropolished surface finishScope of delivery: left, right, mounting material and instructionsonly the Xplorer cases 40 Cutout and 37 Cutout can be attached to this carriernormal Xplorer cases and other Hepco&Becker cases do not fit

£368.14*

Case carrier set cutout stainless steel carrier incl. Xplorer cutout black Case set for KTM 1090 Adventure R (2017-2018)

Case carrier set for KTM 1090 Adventure R (2017-2018) incl. Xplorer motorbike case, blackSet consisting of a double-sided, motorbike model-specific stainless steel case carrier in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the required lock adapters to attach the cases to the carrierMotorbike side case features:recessed 37 litre case on the end pot side40 litre case on the other sidehighly impact-resistant plastic and anodised aluminium sheets in combinationincl. key and cylinderabsolutely watertight thanks to integrated rubber seal in the lidextensive range of accessories available (inner bags, top bags, etc.)Motorbike luggage carrier features:adventure-ready, weather-resistant and bolted stainless steel pannier rackblasted and electropolished surface finishincl. mounting material and assembly instructions

£1,256.61*

Case carrier set Cutout stainless steel carrier incl. Xplorer silver Case set for KTM 1090 Adventure R (2017-2018)

Case carrier set for KTM 1090 Adventure R (2017-2018) incl. Xplorer silver Case set motorbike case, silverSet consisting of a double-sided, motorbike model-specific stainless steel case carrier in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the carrierMotorbike side case features:recessed 37 litre case on the end pot side40 litre case on the other sidehighly impact-resistant plastic and anodised aluminium sheets in combinationincl. key and cylinderabsolutely watertight thanks to integrated rubber seal in the lidextensive range of accessories available (inner bags, top bags, etc.)Motorbike luggage carrier features:adventure-ready, weather-resistant and bolted stainless steel pannier rackblasted and electropolished surface finishincl. mounting material and assembly instructions

£1,213.25*

Side case carrier asymmetric Lock-it black for KTM 1090 Adventure R (2017-2018)

£320.44*

Easyrack top case carrier for combination with original luggage rack black for KTM 1090 Adventure R (2017-2018)

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Easyrack has a high level of strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructionsno further adapters are required for top case mountinghigh-quality surface finishtechnically almost the same as the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwardsthe model-specific base carrier is the same for the Easyrack and AlurackLuggage carriers do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

£178.22*

Alurack top case carrier black for combination with original luggage rack for KTM 1090 Adventure R (2017-2018)

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Alurack has high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific aluminium top case carrier + mounting kit + mounting instructionsno additional adapters are required for top case mountinghigh-quality surface finishtechnically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded downthe model-specific base carrier is the same for the Easyrack and Aluracka special bracket is required to mount the Hepco&Becker aluminium standard top case 35 instead of the normal Alurack bracket (article number: 700007350 or 700007351)Luggage racks do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

£152.20*

Luggage rack extension black for KTM 1090 Adventure R (2017-2018)

Sturdy aluminium plate for widening on almost all luggage racks with a straight support surface if loose luggage is to be transported rather than a top case. The raised edges and additional retaining points make the extension ideal for safely transporting larger luggage rolls, travel bags, tents, duffle bags, etc.Aluminium construction with high strength and high-quality appearanceFastening options for strapsNot suitable for topcase mountingincludes assembly material and instructionshigh-quality plastic coatingRecommended load: 5kg (Please observe the model-specific instructions and the motorbike manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or the tank bag.

£103.63*