KTM 1050 Adventure Accessories
Here you will find all model-specific products available and accessories for KTM 1050 Adventure
- Our crash bars for 1050 Adventure – protecting both your motorcycle and yourself
- skid plate: engine guard plate made from 4 mm aluminium
- Headlight guard – the off-road headlight grille
- Handlebar riser for increased riding comfort and improved ergonomics
- Our 1050 Adventure kickstand enlarger for improved stability and a more secure footing
- The perfectly fitting, premium-quality side case carriers for 1050 Adventure
- Our premium top case carriers such as the Alurack or Easyrack
You will also find the corresponding luggage items with the respective carriers in the accessories section.
Handlebar riser with offset for KTM 1050 Adventure (2015-2016)
From
£73.72*
With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorbike to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorbike. simple installationNaturally TÜV-tested and incl. ABEhigh qualityvarious designs depending on the model: Distances or sleeves under the handlebar clamps; handlebar risers under the handlebars for use with original upper clamp; handlebar risers with lower and upper clamps
Handlebar riser for KTM 1050 Adventure (2015-2016)
From
£43.36*
With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorbike to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorbike. simple installationNaturally TÜV-tested and incl. ABEhigh qualityvarious designs depending on the model: Distances or sleeves under the handlebar clamps; handlebar risers under the handlebars for use with original upper clamp; handlebar risers with lower and upper clamps
Black engine guard for KTM 1050/1190 Adventure (2013-2016)
£276.65*
Engine protection: crash bar for KTM 1050/1190 Adventure from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on country roads or spend most of your time travelling around town, a motorbike crash bar is no longer just a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your KTM 1050/1190 Adventure and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional contact with the ground, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2013-2016Provides effective protection in the event of minor accidents or mishaps
Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
Engine guard for KTM 1050/1190 Adventure leftEngine guard for KTM 1050/1190 Adventure right Screw set (incl. spacers, sleeves, washers etc.)
Multilingual, comprehensive illustrated assembly instructions
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the model-specific information listed in the installation instructions and properties!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
Engine protection plate silver for KTM 1050/1190 Adventure (2013-2016)
£267.10*
Motorbike underride guard: engine protection plate for KTM 1050/1190 Adventure (2013-2016), silver
Even a pavement can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing.
Our engine protection plates protect the manifold and engine block from impacts and stone chipping, even with the heaviest ground contact.
With our underride guard for 1050/1190 Adventure, you not only upgrade your motorbike in terms of safety, but also automatically give it a certain off-road look. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminium, our Hepco&Becker engine protection plate lets enough air through for cooling thanks to its special shape and is naturally angled,
so that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. It enhances the look of your motorbike and is guaranteed never to let you down
Features & important details:
Material: High-strength aluminium, made in Germany
Surface finish: Brushed, anodised Colour: Silver anodisedFor model year(s): 2013-2016Provides additional protection for sensitive parts on the manifold and engine block
Scope of delivery:
Engine protection plate for KTM 1050/1190 AdventureMounting material / screw set
Illustrated installation instructions (DE / EN)
Important notes:
No ABE or registration is required for this product if fitted as intended
Please observe the fitting instructions and model-specific information to determine whether there may be any restrictions.
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
Restrictions may apply to original parts or accessories that have already been fitted; these can be found in the fitting instructions.
Grip guard for KTM 1050/1190 Adventure/R (2013-2016) set, black (left + right)
£156.10*
Grip guard for KTM 1050/1190 Adventure/R from Hepco&Becker
The Hepco&Becker grip guard ensures reliable protection for the rider's hands and the motorbike handlebars both when riding off-road and on asphalt. Model-specific hand protector guard for your KTM 1050/1190 Adventure/R - Tubular steel construction precisely customised to your motorbike for the perfect look. Ideal for all Adventure bikes to stabilise the hand protectors and protect them from breakage in the event of a crash or contact with a large branch, for example!
Reliable, robust protection for the handlebar fittings in the event of a crash with optimum aerodynamics. As individual as you are - make it your bike!
Details & features:
Material: Tubular steel, made in Germany
Surface finish: High-quality, colour-matching powder coating Colour: black For model years: 2013-2016
Scope of delivery:
1 set of grip guards (left & right)
Complete set of mounting material
Bilingual, illustrated assembly instructions
Important notes:
The plastic hand protectors shown in the pictures are part of the delivery condition of the motorbike, they are NOT included!
Please observe the model-specific information listed in the fitting instructions and the features!
Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
May not fit in combination with non-original handlebar clamps, e.g. with comfort handlebars or handlebar risers!
For safety reasons, all protective bars should be adequately checked after a fall and replaced if necessary.
Black lamp guard grille for KTM 1050/1190 Adventure/R (2013-2016)
£102.33*
Our Hepco&Becker lamp guard protects the headlight in many cases and also gives your bike the proper off-road look.adapted to the design of the motorbikeeffective protectionno reflections or danger from glaresimple mounting on mostly existing screw pointssolid construction made from German steelrobust and high-quality coatingmade in Germany without TÜV
Side stand plate silver/black for KTM 1050/1190 Adventure/R (2013-2016)
£51.60*
Side stand extension KTM 1050/1190 Adventure/R (2013-2016)
For widening the contact surface of the side stand - for absolutely secure standing on gravel, sand, dirt, etc.
Quick and easy to fit, made from high-quality CNC-milled aluminium with a powder-coated steel counter bracket - Made in Germany.
Especially when fully loaded or on unpaved surfaces, the motorbike on the side stand can easily sink and tip over.
To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker.
Thanks to the side stand support enlargement to approx. double the surface area compared to the original stand, your 1050/1190 Adventure/R is perfectly protected from mishaps when parking.
Material: Aluminium & powder-coated steel
Colour: silver / black
Developed specifically for the KTM 1050/1190 Adventure/R
For model year(s): 2013, 2014, 2015, 2016
Effective protection when parking
Quick and easy installation with just a few screws
ABE & registration free
Lock-it black side case carrier for KTM 1050/1190 Adventure R/1290 Super Adventure (2015-2020)
£320.87*
The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and customised laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with our lockable Lock-it screws.All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks.stable construction MADE IN GERMANYquickly removable, only inconspicuous small tabs remain on the motorbikehigh-quality surface finishgenerally easy to fit, please refer to the assembly instructions providedScope of delivery: right + left incl. mounting material and installation instructionsplease refer to the vehicle-specific information or the installation instructions to determine whether there are any restrictionsSuitable for most Hepco&Becker hard-shell side cases (please note model-specific information)Luggage systems generally do not require an ABE or registrationTube diameter: 16 mm
Lock-it black side case carrier for KTM 1050/1190 Adventure/R (2013-2016)
£320.87*
The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and customised laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with our lockable Lock-it screws.All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks.stable construction MADE IN GERMANYquickly removable, only inconspicuous small tabs remain on the motorbikehigh-quality surface finishgenerally easy to fit, please refer to the assembly instructions providedScope of delivery: right + left incl. mounting material and installation instructionsplease refer to the vehicle-specific information or the installation instructions to determine whether there are any restrictionsSuitable for most Hepco&Becker hard-shell side cases (please note model-specific information)Luggage systems generally do not require an ABE or registrationTube diameter: 16 mm
Side case carrier cutout for Xplorer cutout case 40/37 for KTM 1050/1190 Adventure/R (2013-2016)
£378.98*
Side pannier rack cutout for KTM 1050/1190 Adventure/R (2013-2016)Motorbike luggage carrier features:adventure-compatible, weather-resistant and bolted stainless steel pannier rackblasted and electropolished surface finishScope of delivery: left, right, mounting material and instructionsonly the Xplorer cases 40 Cutout and 37 Cutout can be attached to this carriernormal Xplorer cases and other Hepco&Becker cases do not fit
Case carrier set cutout stainless steel incl. Xplorer silver Cutout case set for KTM 1050/1190/ Adventure/R
£1,240.13*
Case carrier set for KTM 1050/1190/ Adventure/R incl. Xplorer silver Motorbike case, silverSet consisting of a double-sided, motorbike model-specific stainless steel case carrier in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the carrierMotorbike side case features:recessed 37 litre case on the end pot side40 litre case on the other sidehighly impact-resistant plastic and anodised aluminium sheets in combinationincl. key and cylinderabsolutely watertight thanks to integrated rubber seal in the lidextensive range of accessories available (inner bags, top bags, etc.)Motorbike luggage carrier features:adventure-ready, weather-resistant and bolted stainless steel pannier rackblasted and electropolished surface finishincl. mounting material and assembly instructions
Case carrier set Cutout stainless steel carrier incl. Xplorer Cutout black Case set for KTM 1050/1190/ Adventure/R (2013-)
£1,283.50*
Case carrier set for KTM 1050/1190/ Adventure/R (2013-) incl. Xplorer motorbike case, blackSet consisting of a double-sided, motorbike model-specific stainless steel case carrier in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the carrierMotorbike side case features:recessed 37 litre case on the end pot side40 litre case on the other sidehighly impact-resistant plastic and anodised aluminium sheets in combinationincl. key and cylinderabsolutely watertight thanks to integrated rubber seal in the lidextensive range of accessories available (inner bags, top bags, etc.)Motorbike luggage carrier features:adventure-ready, weather-resistant and bolted stainless steel pannier rackblasted and electropolished surface finishincl. mounting material and assembly instructions
Easyrack top case carrier black for KTM 1050/1190 Adventure/R (2013-2016)
£182.12*
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Easyrack has a high level of strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructionsno further adapters are required for top case mountinghigh-quality surface finishtechnically almost the same as the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwardsthe model-specific base carrier is the same for the Easyrack and AlurackLuggage carriers do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.
Alurack top case carrier black for KTM 1050/1190 Adventure/R (2013-2016)
£156.10*
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Alurack has high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific aluminium top case carrier + mounting kit + mounting instructionsno additional adapters are required for top case mountinghigh-quality surface finishtechnically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded downthe model-specific base carrier is the same for the Easyrack and Aluracka special bracket is required to mount the Hepco&Becker aluminium standard top case 35 instead of the normal Alurack bracket (article number: 700007350 or 700007351)Luggage racks do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.
Luggage rack extension black for KTM 1050 Adventure (2015-2016)
£106.67*
Sturdy aluminium plate for widening on almost all luggage racks with a straight support surface if loose luggage is to be transported rather than a top case. The raised edges and additional retaining points make the extension ideal for safely transporting larger luggage rolls, travel bags, tents, duffle bags, etc.Aluminium construction with high strength and high-quality appearanceFastening options for strapsNot suitable for topcase mountingincludes assembly material and instructionshigh-quality plastic coatingRecommended load: 5kg (Please observe the model-specific instructions and the motorbike manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or the tank bag.