Here you will find model-specific products and accessories for INDIAN Scout Sixty Classic(2025-). Depending on availability for your bike – you can find the following example products and more here:
C-Bow carrier & luggage Sidecarrier for your Scout Sixty Classic
Protection & Crash bars for INDIAN Scout Sixty Classic
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting ring for a tank bag for Scout Sixty Classic
As well as many other comfort and accessory items for your Motorcycle!
Compatible Panniers, Topcases, Tankbags etc. are also linked as related products for their relative carriers.
With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova.
High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 25 watts
ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation)
Improved traffic light conditions
Universal attachment to engine or tank protection bar with tube Ø25mm – Ø32mm, can be attached standing or hanging
Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set
Connection is only via the battery, no connection to the vehicle wiring harness is required
No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote:
The lights can only be switched on approx. 5-15 seconds after the engine has been started. A
voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit.
In older vehicles, this can be achieved by briefly increasing the engine speed.
Switching off must be done manually using the switch. The NOVA LEDs continue to light up until
the voltage limit of 11.8 V is reached, even after the engine is switched off. Only when the voltage
falls below this limit do the lights switch off automatically via the control unit. When switching
on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.
Whether you ride more on rugged terrain, on country roads or in town; a Hepco&Becker guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.Hepco&Becker protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Whether you ride more on rugged terrain, on country roads or in town; a Hepco&Becker guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.Hepco&Becker protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Whether you ride more on rugged terrain, on country roads or in town; a Hepco&Becker guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.Hepco&Becker protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Universal fit thanks to the flexible belt connection. For models for which we cannot offer a model-specific tank ring.
Dimensionally stable thanks to high-density EVA foams, tear-resistant Hypalon and 840D ballistic polyester.
Lockable zippers
Robust handle
Water-repellent outer material
Additional compartments with a mesh compartment inside the lid
Small reflective details for better visibility in traffic
Removable, waterproof inner sack with roll top closure - easy to remove with snap fasteners
Volume expansion through all-round zipLoops on the tankbag for attaching optional, individual accessories such as the Hepco & Becker card / smartphone case
C-Bow sidecarrier for Indian Scout Sixty Classic (2025-)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
C-Bow sidecarrier for Indian Scout Sixty Classic (2025-)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
On motorcycles with a divided seat. The passenger seat is replaced with one of these fantastic Hepco&Becker Soloracks. Available for many models. A solorack makes it easy to take small luggage with you and fasten it securely. Our product line also includes an attractive solorack handheld bag. (Liberty Handbag for Soloracks: 620995) made to our quality standards - the perfect addition.custom designed for each bikesturdy, elegant designquality German steel tubing with premium high-gloss chrome platingprecise manufacturingeasy assemblyincl. assembly instructionrecommended load: 5kg (please check manual or bike specific infos)
A guaranteed relaxed ride - on motorcycles with a divided seat. The passenger seat is replaced with one of these fantastic Hepco&Becker Soloracks with backrest. Available for many models. A solorack makes it easy to take small luggage with you and fasten it securely. Our product line also includes an attractive solorack handheld bag. (Liberty Handbag for Soloracks: 620995) made to our quality standards - the perfect addition.custom designed for each bikesturdy, elegant designquality German steel tubing with premium high-gloss chrome platingprecise manufacturingeasy assemblyincl. assembly instructionrecommended load: 5kg (please check manual or bike specific infos)
Provides highest comfort and stylish designPerfect adaptation to the SolorackComfortable leaning for the rider during the rideWell-padded cushion for additional comfortEasy installation without complicated adjustments
NOTE:This Legacy rear bag set has been specially developed for some Hepco&Becker Soloracks. You can find out whether this set fits your motorcycle under the "My Bike" section.Set consists of Legacy tank bag/rear bag, basic counter holder, basic attachment and holding adapter (Solorack not included)Reinforced side walls and lid to maintain shapeStable base shell made of EVA, covered with Lycra stretch2-way zipper (lockable with a small combination lock, for example)Recommended load: 3-5kg (Please note the model-specific information for the respective carrier, as well as the motorcycle manufacturer-specific information. Heavy luggage should generally not be transported in the handbag, but in the side cases or the tank bag.