HONDA X-ADV Accessories

With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorbike to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorbike. simple installationNaturally TÜV-tested and incl. ABEhigh qualityvarious designs depending on the model: Distances or sleeves under the handlebar clamps; handlebar risers under the handlebars for use with original upper clamp; handlebar risers with lower and upper clamps

With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorbike to suit you and therefore ride in a more relaxed and comfortable manner. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorbike. simple installationNaturally TÜV-tested and incl. ABEhigh qualityvarious designs depending on the model: Distances or sleeves under the handlebar clamps; handlebar risers under the handlebars for use with original upper clamp; handlebar risers with lower and upper clamps

Engine protection: crash bar for Honda X-ADV from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on country roads or spend most of your time travelling around town, a motorbike crash bar is no longer just a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Honda X-ADV and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2021-2024Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for Honda X-ADV leftEngine guard for Honda X-ADV right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated fitting instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Engine protection: crash bar for Honda X-ADV from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on country roads or spend most of your time travelling around town, a motorbike crash bar is no longer just a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Honda X-ADV and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: SilverFor model year(s): 2021-2024Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for Honda X-ADV leftEngine guard for Honda X-ADV right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated fitting instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

For selected motorbike models frequently used in riding schools, from 125cc to 750cc, we offer special front and rear guards that can be combined with our engine guards.good protection in the event of falls and crashes at low speedsTurn signals, clutch and brake levers, exhaust silencers, fairing parts etc. are effectively protectedhigh-quality powder coatingincl. mounting materialWe offer special conditions for driving schools. Please get in touch with our contact persons. Tel: 06331/1453-222 or mail: shop@hepco-becker.de

For selected motorbike models frequently used in riding schools, from 125cc to 750cc, we offer special front and rear guards that can be combined with our engine guards.good protection in the event of falls and crashes at low speedsTurn signals, clutch and brake levers, exhaust silencers, fairing parts etc. are effectively protectedhigh-quality powder coatingincl. mounting materialWe offer special conditions for driving schools. Please get in touch with our contact persons. Tel: 06331/1453-222 or mail: shop@hepco-becker.de

Protective bar for rear silencer - black for Honda X-ADV (2021-2024)For additional protection thanks to the customised shape Simply blends in with the look of the motorbike Scope of delivery: 1 bracket + mounting material + mounting instructions

Grip guard for Honda X-ADV from Hepco&Becker The Hepco&Becker grip guard guarantees reliable protection for the rider's hands and the motorbike handlebars both when riding off-road and on asphalt. Model-specific hand protector guard for your Honda X-ADV - Tubular steel construction precisely customised to your motorbike for the perfect look. Ideal for all adventure bikes to stabilise the hand protectors and protect them from breakage in the event of a crash or contact with a large branch, for example! Reliable, robust protection for the handlebar fittings in the event of a crash with optimum aerodynamics. As individual as you are - make it your bike! Details & features: Material: Tubular steel, made in Germany Surface finish: High-quality, colour-matching powder coating Colour: black For model years: 2021-2024 Scope of delivery: 1 set of grip guards (left & right) Complete set of mounting material Bilingual, illustrated assembly instructions Important notes: The plastic hand protectors shown in the pictures are part of the delivery condition of the motorbike, they are NOT included! Please observe the model-specific information listed in the fitting instructions and the features! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! May not fit in combination with non-original handlebar clamps, e.g. with comfort handlebars or handlebar risers! For safety reasons, all protective bars should be adequately checked after a fall and replaced if necessary.

Protect the front mudguard of your brand new Honda X-ADV (2021-2024) with this stylish black fender guard.

Side stand extension Honda X-ADV (2021-2024) For widening the contact surface of the side stand - for absolutely secure standing on gravel, sand, crushed stone, etc. Quick and easy to fit, made from high-quality, CNC-milled aluminium with a powder-coated steel counter bracket - Made in Germany. Especially when fully loaded or on an unpaved surface, the motorbike can easily sink and tip over on the side stand. To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker. The side stand support is enlarged to approx. twice the surface area of the original stand, so your X-ADV is perfectly protected against accidents when parking. Material: Aluminium & powder-coated steel Colour: silver / black Developed specifically for the Honda X-ADV For model year(s): 2021, 2022, 2023, 2024 Effective protection when parking Quick and easy installation with just a few screws ABE & registration free

To make it easier for the passenger, we offer high-quality surface coatingsimple assemblyincl. mounting materialsturdy steel construction MADE IN GERMANYNo ABE or registration is required for this product if installed as intended

C-Bow side bag holder for Honda X-ADV (2021-2024) is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, right, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

The bolt-on side case carriers from Hepco&Becker are firmly attached to the motorbike frame. Almost all Hepco&Becker touring side case systems fit onto this carrier. The cases are secured to the carrier using a metal retaining lock to prevent theft. A lock adapter is also required for this. This is normally supplied with the side cases. This lock adapter is screwed to the right and left at the rear of the carrier and provides the mount for the case retaining lock.The model-specific carriers are solidly designed and offer effective protection for the rider's or pillion passenger's legs even in the event of a fall.The side case carriers from Hepco&Becker can usually be combined with our rear carriers without any problems. Please refer to the fitting instructions and the model-specific information.Tubular steel construction MADE IN GERMANYfirmly bolted to the motorbike framehigh-quality surface finishFits most Hepco&Becker hard-shell side cases (please refer to the model-specific instructions for the respective carrier for any restrictions that may apply)Indicators usually remain in their original position, but sometimes have to be moved to ensure a certain beam angle (please refer to the installation instructions for the product)Scope of delivery: right + left incl. mounting material and instructionsLuggage systems generally do not require an ABE or registrationTube diameter: 16 mm

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Easyrack has a high level of strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructionsno further adapters are required for top case mountinghigh-quality surface finishtechnically almost the same as the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwardsthe model-specific base carrier is the same for the Easyrack and AlurackLuggage carriers do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Alurack has high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific aluminium top case carrier + mounting kit + mounting instructionsno additional adapters are required for top case mountinghigh-quality surface finishtechnically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded downthe model-specific base carrier is the same for the Easyrack and Aluracka special bracket is required to mount the Hepco&Becker aluminium standard top case 35 instead of the normal Alurack bracket (article number: 700007350 or 700007351)Luggage racks do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

The slim, lightweight and unobtrusive luggage solution from Hepco&Becker. The Smartrack offers a way to individually attach soft luggage to the rear of the motorbike. A rucksack or bag can be lashed through the side slots. Our rear panniers with the Basic System can also be easily attached to it using an interchangeable module. suitable for rear panniers with Basic attachmentflexibleincl. screw set and installation instructionsaBE or registration is not necessaryhigh-quality powder coatingsolid construction

Railing especially for Honda top caseoffers fastening options for light luggage such as sleeping bags or rain jacketsLuggage can be fastened with strapseasy mounting, no drilling necessaryTopcase stays dry thanks to special rubber discssolid tubular steel Made in Germany