Do you want to attach Hepco&Becker C-Bow side bags and cases to your Honda CBR 650 R (from 2021)? Our black C-Bow side carriers provide a solid solution. They are perfect for mounting Hepco&Becker C-Bow side bags and cases. The surface finish is of high quality, ensuring an appealing look. Please note that standard Hepco&Becker hard cases like the Junior or Journey are not compatible with this carrier. Similarly, Krauser K-Wing cases are not suitable for use with the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. Please follow the installation manual, model-specific guidelines, and the manufacturer's recommendations to consider any possible restrictions. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. However, please follow the installation manual or model-specific guidelines for each carrier. Luggage rack extensions may affect the attachment of the bags to the carrier. It's important to note that these carriers do not require a General Operating Permit (Allgemeine Betriebserlaubnis or ABE) or registration in the vehicle papers. The carriers were developed for the stock condition of the motorcycle. However, it's important to be aware that they have not been tested with accessories such as exhaust systems, license plate holders, or other turn signals. Therefore, it is essential to ensure there is sufficient distance between the bags and the exhaust, and the turn signals have an adequate emission angle. The exhaust stream should not be directed towards the bags.

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

The black Sportrack from Hepco&Becker offers the perfect solution for luggage attachment on sport bikes like the Honda CBR 650 R (2021-). Hepco&Becker has crafted a tailored response to the widely recognized challenge of luggage attachment on these motorcycles. The Sportrack is anchored in the place of the pillion seat using the original mount and can be opened using the vehicle ignition key. This innovative design allows for comprehensive attachment possibilities for luggage straps, ensuring secure attachment of various luggage items. The installation of the Sportrack is simple and straightforward. The high-quality powder coating not only gives it an appealing appearance but also ensures weather resistance and durability. The Sportrack can be quickly removed, following the same principle as the pillion seat. With comprehensive attachment possibilities for luggage straps, the Sportrack provides a secure hold for a variety of luggage items. You can expand it for larger luggage rolls with an optional widening kit. The design of the Sportrack resembles a pillion seat cover and serves as an additional visual highlight. The secure luggage attachment directly behind the rider does not compromise the bike's handling and ensures undisturbed riding enjoyment. The black Sportrack is top case compatible, but only in combination with the Journey Topcases 30/40/50 in the universal version with a plastic plate. Please note that regular Hepco&Becker top cases with a metal locking mechanism on the top case bottom are not compatible. It can also be combined with tail bags featuring the Lock-it closure system, such as the Royster Lock-it tail bag. A General Operating Permit (ABE) or entry in the vehicle documents is not required. The included installation manual makes the setup process easier. Enjoy unrestricted riding pleasure and secure luggage attachment with the black Sportrack from Hepco&Becker on your Honda CBR 650 R (2021-).

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

The Minirack Soft Luggage Rear Carrier in Black has been specifically designed for the Honda CBR 650 R model from 2021 onwards. This Minirack rear carrier by Hepco&Becker offers a sleek, lightweight, and inconspicuous solution for securely transporting soft luggage on your motorcycle. The Minirack allows you to individually attach soft luggage to the rear of your bike. The recommended load capacity for this Minirack rear carrier is between 3 and 5 kg. Please observe the vehicle-specific instructions in the installation manual and adhere to the guidelines provided by the motorcycle manufacturer to ensure the safety and stability of your motorcycle during transportation. It's important to note that this Minirack rear carrier is not suitable for mounting top cases. However, its design allows for secure attachment of soft luggage. Installing this Minirack rear carrier does not require a General Operating Permit (ABE) or registration. It is coated with high-quality powder coating to ensure durability and corrosion resistance. This Minirack rear carrier has been solidly manufactured in Germany and provides a reliable solution for securely transporting soft luggage on your Honda CBR 650 R.

The Easyrack Top Case Carrier in black is specifically designed for Honda CBR 650 R models from the year 2021 onwards. With this high-quality carrier, you can easily mount top cases or soft luggage using a model-specific installation kit and an Easyrack adapter plate. Please note that this carrier is not suitable for top cases with a universal plastic plate. The Easyrack has been developed with a special focus on design and functionality, aiming to seamlessly blend into the appearance of your motorcycle. It is constructed using a combination of high-quality aluminum and a sturdy steel base carrier, providing not only strength but also an aesthetic look. Additional attachment points in the design allow for secure attachment of luggage rolls or other accessories. The solid construction of steel and aluminum ensures durability and stability. The delivery includes the model-specific carrier, an installation kit, and a detailed installation manual. No additional adapters are required to securely attach Hepco&Becker top cases or soft luggage. The operation of the Easyrack is technically comparable to the Alurack top case carrier. The difference lies in the fact that the bracket for top case attachment on the Easyrack can be folded down when not in use, while the bracket of the Alurack remains in an upright position. The model-specific base carrier of the Easyrack is identical to that of the Alurack, allowing for uncomplicated installation. The luggage carrier is exempt from requiring an ABE or registration and thus complies with all relevant legal requirements. The recommended payload is 5 kg. Please be sure to observe the specific instructions in the installation manual as well as the recommendations of the motorcycle manufacturer to ensure safety. It is recommended to transport heavy luggage preferably in the side cases or the tank bag, so as not to compromise the stability and balance of the motorcycle. The recommended maximum speed is 130 km/h to ensure optimal performance and safety. The Easyrack top case carrier has been specifically designed for the original condition of your motorcycle. Please note that it has not been tested in conjunction with accessories such as exhaust systems, license plate holders, or other indicators.

Would you like to add additional functionality to your sporty Honda CBR 650 R (model years 2021 and onwards)? Our black Alurack top case carrier from Hepco&Becker offers an elegant solution. This set includes a model-specific mounting kit and an Alurack adapter plate, specially designed to accommodate Hepco&Becker top cases or soft luggage (not compatible with top cases with universal plastic plates). Each Alurack top case carrier is designed specifically to seamlessly integrate into the design of your Honda CBR 650 R. Constructed from high-quality aluminum combined with a steel base carrier, the Alurack offers both high strength and a sleek appearance. Additional attachment points for luggage straps are integrated into the carrier's design to allow secure attachment of luggage rolls or other items. The solid base construction is made of steel, while the aluminum carrier plate ensures stability. Included in the package is the model-specific Alurack top case carrier, the mounting kit, and a detailed manual. No additional adapters for top case mounting are required. The black design of the Alurack harmoniously blends into the appearance of your Honda CBR 650 R. From a technical perspective, it functions similarly to the Easyrack top case carrier, with the top case mounting bracket fixed in an upward position and unable to be folded down. The model-specific base carrier is the same for both the Easyrack and Alurack. For the mounting of the Hepco&Becker Alu Standard Top Case 35, a special bracket is required, which is used instead of the regular Alurack bracket (part numbers: 700007350 or 700007351). The luggage carrier doesn't require a General Operating Permit (ABE) or registration. The recommended load capacity is 5 kg (please observe model-specific instructions, the installation guide, and the motorcycle manufacturer's specifications). It's advisable not to transport heavy items in the top case but rather in the side cases or tank bag. The recommended maximum speed for the Alurack top case carrier is 130 km/h. Please note that the carrier is designed for the motorcycle's stock condition and hasn't been tested with accessories such as exhausts, license plate holders, or other turn signals.