Designed for the Honda CB 500 X (2019-), this anthracite tank guard by HEPCO&BECKER perfectly follows the lines of your motorcycle, giving it a distinctive character. In case of a tip-over or unintended ground contact, it protects not only the bike but also you as the rider from significant damage, providing optimal protection and preventing costly repairs after unexpected mishaps. The material efficiently absorbs impact forces, ensuring added safety. Following a fall, it's advisable to replace the guard, as invisible damage to welds or the material might compromise its protective capabilities in subsequent incidents. Individual parts or sides can be easily ordered via email from us. This guard shields the tank, side fairings, and front and features a high-quality surface finish, equally useful for securing the motorcycle. Crafted from sturdy round tubing in Germany, the package includes both right and left guards along with the necessary mounting hardware. Another advantage: These engine guards do not require registration or an ABE (General Operating Permit) – simply install and ride! However, please refer to the enclosed installation manual and the model-specific notes for any potential limitations.

Whether you ride more on rugged terrain, on country roads or in town; a HEPCO&BECKER guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.HEPCO&BECKER protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

The anthracite Lock-it side case carrier by Hepco&Becker has been specifically designed for the Honda CB 500 X (model year 2019 and newer). This carrier is constructed from German steel tubing and custom-made laser parts that are additionally reinforced at stress points. The standout feature of this carrier is its quick and easy installation and removal. To do so, you simply release the Lock-it screws with a quarter turn, allowing the side parts to be removed to the rear or to the side. For additional theft protection, Hepco&Becker offers optional lockable Lock-it screws. All cases are locked onto the carrier using a locking mechanism located on the case itself. Normally, this requires the use of lock adapters included in the case's packaging, which are fastened to the carrier on the right and left sides, providing attachment points for the case's locking mechanisms. This side case carrier is characterized by its sturdy "Made in Germany" construction and features a high-quality surface finish. Installation is generally straightforward, with the included installation manual providing guidance. Please refer to the vehicle-specific information or the installation manual for any potential limitations. The carrier is suitable for most Hepco&Becker hard shell side cases (please note any model-specific information). In general, luggage systems do not require a General Operating Permit (ABE) or registration. The tube diameter is 16 mm.

Would you like to attach Hepco&Becker C-Bow side bags and cases to your Honda CB 500 X (2019-)? Our anthracite C-Bow side carriers offer a sturdy solution. These carriers are specifically designed to mount Hepco&Becker C-Bow side bags and cases on your motorcycle. The carriers are provided with a high-quality surface finish and are designed to maintain the appearance of your motorcycle. Please note that standard Hepco&Becker hard cases like the Junior or Journey are not compatible with these carriers. Similarly, Krauser K-Wing cases cannot be used with the C-Bow carrier. The recommended load capacity is 5 kg per bag or case. It's important to follow the installation manual, model-specific guidelines, and the manufacturer's recommendations to consider any possible restrictions. In most cases, these carriers can be easily combined with top case carriers, sissy bars, or solo racks. However, please follow the installation manual or model-specific guidelines for each carrier. Luggage rack extensions may affect the attachment of the bags to the carrier. It's important to know that these carriers do not require a General Operating Permit (Allgemeine Betriebserlaubnis or ABE) or registration in the vehicle papers. The carriers are specifically designed for the stock condition of your machine. However, please note that they have not been tested with accessories such as exhausts, license plate holders, or other turn signals. Ensure that the bags have sufficient clearance from the exhaust and that the turn signals have an adequate light emission angle. The exhaust stream should not be directed toward the bags.

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

The anthracite Easyrack top case carrier has been specifically designed for the Honda CB 500 X models from 2019 onwards. This carrier offers a practical way to extend the storage space on your motorcycle. It consists of a model-specific installation kit and an Easyrack adapter plate, allowing for the attachment of Hepco&Becker top cases or soft luggage. Please note that this carrier is not suitable for top cases with a universal plastic plate. The Easyrack has been designed with a focus on harmoniously integrating into the overall design of your motorcycle. The combination of high-quality aluminum and a sturdy steel base carrier ensures not only durability but also an appealing visual aesthetic. Additional attachment points in the design enable secure attachment of luggage rolls or other accessories. The solid construction of steel and aluminum guarantees longevity and stability. Included in the delivery are the model-specific carrier, an installation kit, and a comprehensive installation manual. No additional adapters are required to securely attach Hepco&Becker top cases or soft luggage. The operation of the Easyrack is technically comparable to the Alurack top case carrier. The difference lies in the fact that the bracket for top case attachment on the Easyrack can be folded down when not in use, while the bracket of the Alurack remains in an upright position. The model-specific base carrier of the Easyrack is identical to that of the Alurack, allowing for uncomplicated installation. The luggage carrier is exempt from requiring an ABE (general operating permit) or registration, thus complying with all relevant legal requirements. The recommended payload is 5 kg. Please observe the specific instructions in the installation manual as well as the recommendations of the motorcycle manufacturer to ensure safety. It is recommended to transport heavy luggage preferably in the side cases or the tank bag to not compromise the stability and balance of the motorcycle. The recommended maximum speed is 130 km/h to ensure optimal performance and safety. The Easyrack top case carrier has been specifically developed for the stock condition of your motorcycle. Please note that it has not been tested in combination with accessories such as exhaust systems, license plate holders, or other indicators.

The innovative Lock-it tank bag attachment - Fidlock patentedThis solid tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a Lock-it tank ring, as well as the counter holder, which can be individually screwed to the tank bag, depending on the shape of the tank and the steering angle.The tank cap can still be opened with the tank ring mounted without any problems.In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to manually select whether a universal tank ring is available for the desired model. (See Main Menu -> Tank Rings Lock-it)CHARACTERISTICS:Absolutely secure hold, even at high speedsmechanical/magnetic lockingEasy handlingThe tank bag is simply put on and, thanks to the magnets, locks itself with an audible clickUnlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedSimple but effective mechanicsFidlock patentedShielded magnetic field, safe for credit cards and electronic devicesRecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productRecommended load in the tank bag: approx. 3kgIn Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

Do you want to enhance the functionality and versatility of your Honda CB 500 X (model years 2019 and onwards)? Our anthracite/black Alurack top case carrier from Hepco&Becker offers the ideal solution. This set includes a model-specific mounting kit and an Alurack adapter plate, specially designed to accommodate Hepco&Becker top cases or soft luggage (not compatible with top cases with universal plastic plates). Each Alurack top case carrier is designed specifically to seamlessly integrate into the design of your Honda CB 500 X. Constructed from high-quality aluminum combined with a steel base carrier, the Alurack offers both high strength and a modern look. Additional attachment points for luggage straps are integrated into the carrier's design to allow secure attachment of luggage rolls or other items. The solid base construction is made of steel, while the aluminum carrier plate ensures stability. Included in the package is the model-specific Alurack top case carrier, the mounting kit, and a detailed manual. No additional adapters for top case mounting are required. The anthracite/black design of the Alurack harmoniously blends into the appearance of your Honda CB 500 X. From a technical perspective, it functions similarly to the Easyrack top case carrier, with the top case mounting bracket fixed in an upward position and unable to be folded down. The model-specific base carrier is the same for both the Easyrack and Alurack. For the mounting of the Hepco&Becker Alu Standard Top Case 35, a special bracket is required, which is used instead of the regular Alurack bracket (part numbers: 700007350 or 700007351). The luggage carrier doesn't require a General Operating Permit (ABE) or registration. The recommended load capacity is 5 kg (please observe model-specific instructions, the installation guide, and the motorcycle manufacturer's specifications). It's advisable not to transport heavy items in the top case but rather in the side cases or tank bag. The recommended maximum speed for the Alurack top case carrier is 130 km/h. Please note that the carrier is designed for the motorcycle's stock condition and hasn't been tested with accessories such as exhausts, license plate holders, or other turn signals.

hochwertige Oberflächenbeschichtungeinfache Montageinkl. Montagematerialstabile Konstruktion aus Stahl MADE IN GERMANYbenötigt keine ABE oder Eintragung in die Papiere