DUCATI Scrambler 1100 Dark Pro/Pro/Sport Pro Accessories

Engine protection: crash bar for Ducati Scrambler 1100 Dark Pro/Pro/Sport Pro from Hepco & Becker Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory. Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Ducati Scrambler 1100 Dark Pro/Pro/Sport Pro and give the motorbike a characteristic look, but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage! Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it. Features & details: Material: Tubular steel made in GermanySurface finish: High-quality powder coatingColour: BlackFor model year(s): 2021-2024Provides effective protection in the event of minor accidents or mishaps Extremely helpful when lashing the motorbike, e.g. on trailers Scope of delivery: Engine guard for Ducati Scrambler 1100 Dark Pro/Pro/Sport Pro leftEngine guard for Ducati Scrambler 1100 Dark Pro/Pro/Sport Pro right Screw set (incl. spacers, sleeves, washers etc.) Multilingual, comprehensive illustrated assembly instructions Important notes: No ABE or registration is required for this product if fitted as intended Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions. We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222

Our Hepco&Becker lamp guard protects the headlight in many cases and also gives your bike the proper off-road look.adapted to the design of the motorbikeeffective protectionno reflections or danger from glaresimple mounting on mostly existing screw pointssolid construction made from German steelrobust and high-quality coatingmade in Germany without TÜV

Side stand extension Ducati Scrambler 1100 Dark Pro/Pro/Sport Pro (2021-2024) For widening the contact surface of the side stand - for absolutely secure standing on gravel, sand, dirt etc. Quick and easy to fit, made from high-quality CNC-milled aluminium with a powder-coated steel counter support - Made in Germany. Especially when fully loaded or on unpaved surfaces, the motorbike can easily sink and tip over on the side stand. To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker. The side stand support is enlarged to approximately double the surface area compared to the original stand, so your Scrambler 1100 Dark Pro/Pro/Sport Pro is perfectly protected against accidents when parking. Material: Aluminium & powder-coated steel Colour: silver / black Model-specific development for the Ducati Scrambler 1100 Dark Pro/Pro/Sport Pro For model year(s): 2021, 2022, 2023, 2024 Effective protection when parking Quick and easy installation with just a few screws ABE & registration free

Universal fit thanks to flexible belt fastening. For models for which we cannot offer a model-specific tank ring for technical reasons.Dimensionally stable thanks to high-density EVA foams, tear-resistant Hypalon and 840D ballistic polyester. Lockable zips Robust carrying handle Water-repellent outer material Additional compartments with mesh pocket inside the lid Small reflective details for better visibility in road traffic Removable, waterproof inner bag with roll-top fastening - easy removal with press stud fasteningVolume expansion through all-round zipLoops on the tank bag for attaching optional, customised accessories such as the Hepco&Becker map/smartphone bag

C-Bow side bag holder for Ducati Scrambler 1100 Dark Pro/Pro/Sport Pro (2021-2024) is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Easyrack has a high level of strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructionsno further adapters are required for top case mountinghigh-quality surface finishtechnically almost the same as the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwardsthe model-specific base carrier is the same for the Easyrack and AlurackLuggage carriers do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Alurack has high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific aluminium top case carrier + mounting kit + mounting instructionsno additional adapters are required for top case mountinghigh-quality surface finishtechnically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded downthe model-specific base carrier is the same for the Easyrack and Aluracka special bracket is required to mount the Hepco&Becker aluminium standard top case 35 instead of the normal Alurack bracket (article number: 700007350 or 700007351)Luggage racks do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

The tubular luggage racks from Hepco&Becker are manufactured specifically for each model and only fit the motorbike listed in the fitting instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks guarantee maximum strength and a very high level of safety. Thanks to the high-quality coating and with proper care, the look is retained in the long term. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is not enough space, the bridge can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please observe the model-specific instructions and the motorbike manufacturer's specifications) Can usually be combined with side case carriers or C-Bow holders without any problems (follow the fitting instructions and model-specific information) Luggage racks generally do not require an ABE or registration Scope of delivery: Luggage rack + mounting material + instructions Made in Germany Not suitable for topcases, only suitable for soft luggage!

Sturdy aluminium plate for widening on almost all luggage racks with a straight support surface if loose luggage is to be transported rather than a top case. The raised edges and additional retaining points make the extension ideal for safely transporting larger luggage rolls, travel bags, tents, duffle bags, etc.Aluminium construction with high strength and high-quality appearanceFastening options for strapsNot suitable for topcase mountingincludes assembly material and instructionshigh-quality plastic coatingRecommended load: 5kg (Please observe the model-specific instructions and the motorbike manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or the tank bag.