DUCATI Multistrada V2 / S Accessories

Grip guard for Ducati Multistrada V2 / S from Hepco&Becker The Hepco&Becker grip guard guarantees reliable protection for the rider's hands and the motorbike handlebars both when riding off-road and on asphalt. Model-specific hand protector guard for your Ducati Multistrada V2 / S! Tubular steel construction adapted precisely to your motorbike for the perfect look. Ideal for all adventure bikes to stabilise the hand protectors and protect them from breakage in the event of a crash or contact with a large branch, for example! Reliable, robust protection for the handlebar fittings in the event of a crash with optimum aerodynamics. As individual as you are - make it your bike! Details & features: Material: Tubular steel, made in Germany Surface finish: High-quality, colour-matching powder coating Colour: red For model years: 2025- Scope of delivery: 1 set of grip guards (left & right) Complete set of mounting material Bilingual, illustrated assembly instructions Important notes: The plastic hand protectors shown in the pictures are part of the delivery condition of the motorbike, they are NOT included! Please observe the model-specific information listed in the fitting instructions and the features! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! May not fit in combination with non-original handlebar clamps, e.g. with comfort handlebars or handlebar risers! For safety reasons, all protective bars should be adequately checked after a fall and replaced if necessary.

Grip guard for Ducati Multistrada V2 / S from Hepco&Becker The Hepco&Becker grip guard guarantees reliable protection for the rider's hands and the motorbike handlebars both when riding off-road and on asphalt. Model-specific hand protector guard for your Ducati Multistrada V2 / S - Tubular steel construction precisely customised to your motorbike for the perfect look. Ideal for all adventure bikes to stabilise the hand protectors and protect them from breakage in the event of a crash or contact with a large branch, for example! Reliable, robust protection for the handlebar fittings in the event of a crash with optimum aerodynamics. As individual as you are - make it your bike! Details & features: Material: Tubular steel, made in Germany Surface finish: High-quality, colour-matching powder coating Colour: black For model years: 2025- Scope of delivery: 1 set of grip guards (left & right) Complete set of mounting material Bilingual, illustrated assembly instructions Important notes: The plastic hand protectors shown in the pictures are part of the delivery condition of the motorbike, they are NOT included! Please observe the model-specific information listed in the fitting instructions and the features! Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike! May not fit in combination with non-original handlebar clamps, e.g. with comfort handlebars or handlebar risers! For safety reasons, all protective bars should be adequately checked after a fall and replaced if necessary.

Side stand extension Ducati Multistrada V2 / S (2025-) For widening the contact surface of the side stand - for absolutely secure standing on gravel, sand, dirt etc. Quick and easy to fit, made from high-quality CNC-milled aluminium with a powder-coated steel counter support - Made in Germany. Especially when fully loaded or on unpaved surfaces, the motorbike can easily sink and tip over on the side stand. To free your motorbike from this danger, we recommend a model-specific, moulded side stand plate from Hepco&Becker. The side stand support is enlarged to approximately double the surface area compared to the original stand, so your Multistrada 950/S is perfectly protected against accidents when parking. Material: Aluminium & powder-coated steel Colour: silver / black Developed specifically for the Ducati Multistrada V2 / S (2025-) For model year(s): 2025- Effective protection when parking Quick and easy installation with just a few screws ABE & registration free

Basic tank ring for Ducati Multistrada V2 / S (2025-)Simple and innovative at the same time - our BASIC tank ring This functional tank ring enables the attachment of a Hepco&Becker tank bag.The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag for Ducati Multistrada V2 / S (2025-) and you have everything you need. Each model-specific tank ring is stored in the "My Bike" database for the respective motorbike model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap in the direction of travel at the front of the tank bag and the tank bag is then simply removed No ABE or registration is required for this product when fitted as intended Recommended maximum speed when the tank bag is fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Please observe the motorbike manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remain the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centring. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Further information: A tank bag with Lock-it counterholder cannot be fitted to a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.

C-Bow side bag holder for Ducati Multistrada V2 / S (2025-) is designed to accommodate a wide range of Hepco&Becker Bags. Softbags for sporty, dynamic motorbikes and saddlebags for choppers and cruisers can be attached to the motorbike with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorbike and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions.solid side carrier for mounting Hepco&Becker C-Bow side bags and panniershigh-quality surface finishnormal Hepco&Becker hard cases such as the Junior or Journey do not fit!Krauser K-Wing cases do not fit on the C-Bow carrier!Recommended payload: 5kg per bag/case (please observe the assembly instructions, vehicle-specific information and motorbike manufacturer's specifications for any restrictions that may apply)can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier)Luggage rack extensions can restrict bag mounting on the carrierNo ABE or registration is required for this product if fitted as intendedScope of delivery: left, right, mounting material and instructionsDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

Cutout side pannier rack for Ducati Multistrada V2 / S (2025-)Features Motorbike luggage carrier:adventure-compatible, weather-resistant and bolted stainless steel pannier rackpowder-coatedScope of delivery: left, right, mounting material and instructionsonly the Xplorer cases 40 Cutout and 37 Cutout can be attached to this carriernormal Xplorer cases and other Hepco&Becker cases do not fit

Case carrier set for Ducati Multistrada V2 / S (2025-) incl. Xplorer motorbike case, silverSet consisting of a double-sided, motorbike model-specific case carrier in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the carrierMotorbike side case features:recessed 37 litre case on the end pot side40 litre case on the other sidehighly impact-resistant plastic and anodised aluminium sheets in combinationincl. key and cylinderabsolutely watertight thanks to integrated rubber seal in the lidextensive range of accessories available (inner bags, top bags, etc.)Motorbike luggage carrier features:adventure-ready, weather-resistant and bolted stainless steel pannier rackpowder-coatedincl. mounting material and assembly instructions

Carrier set for Ducati Multistrada V2 / S (2025-) incl. Xplorer motorbike case, blackSet consisting of a double-sided, motorbike model-specific case carrier in combination with an Xplorer 40 and a recessed Xplorer 37 side case incl. key, lock cylinder and the lock adapters required to attach the cases to the carrierMotorbike side case features:recessed 37 litre case on the end pot side40 litre case on the other sidehighly impact-resistant plastic and anodised aluminium sheets in combinationincl. key and cylinderabsolutely watertight thanks to integrated rubber seal in the lidextensive range of accessories available (inner bags, top bags, etc.)Motorbike luggage carrier features:adventure-ready, weather-resistant and bolted stainless steel pannier rackpowder-coatedincl. mounting material and assembly instructions

The slim, lightweight and unobtrusive luggage solution from Hepco&Becker. The Smartrack offers a way to individually attach soft luggage to the rear of the motorbike. A rucksack or bag can be lashed through the side slots. Our rear panniers with the Basic System can also be easily attached to it using an interchangeable module. suitable for rear panniers with Basic attachmentflexibleincl. screw set and fitting instructionsaBE or registration is not necessaryhigh-quality powder coatingsolid construction

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Easyrack has a high level of strength and a very elegant appearance. Additional fastening points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific Easyrack top case carrier + mounting kit + mounting instructionsno additional adapters are required for top case mountinghigh-quality surface finishtechnically almost the same as the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwardsthe model-specific base carrier is the same for the Easyrack and AlurackLuggage carriers do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Alurack top case carrier is developed specifically for each model and therefore blends in with the harmonious overall appearance of the motorbike. Thanks to the production from high-quality aluminium in combination with a steel base carrier, the Alurack has high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack.solid basic construction made of steel and an aluminium carrier plateScope of delivery: model-specific aluminium top case carrier + mounting kit + mounting instructionsno additional adapters are required for top case mountinghigh-quality surface finishtechnically, it works almost the same as the Easyrack top case carrier, except that the bracket for the top case mount is fixed at the top and cannot be folded downthe model-specific base carrier is the same for the Easyrack and Aluracka special bracket is required to mount the Hepco&Becker aluminium standard top case 35 instead of the normal Alurack bracket (article number: 700007350 or 700007351)Luggage racks do not require an ABE or registrationRecommended payload: 5kg payload (please observe model-specific information, the stored assembly instructions and motorbike manufacturer information)Note: Heavy luggage should generally not be transported in the top case, but in the side cases or the tank bag.Recommended maximum speed: 130 km/hDeveloped for the standard condition of the machine. Not tested with accessories such as exhaust, licence plate holder or other indicators.

Sturdy aluminium plate for widening on almost all luggage racks with a straight support surface if loose luggage is to be transported rather than a top case. The raised edges and additional retaining points make the extension ideal for safely transporting larger luggage rolls, travel bags, tents, duffle bags, etc.Aluminium construction with high strength and high-quality appearanceFastening options for strapsNot suitable for topcase mountingincludes assembly material and instructionshigh-quality plastic coatingRecommended load: 5kg (Please observe the model-specific instructions and the motorbike manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or the tank bag.