BMW R 12 G/S Accessories

Here you will find model-specific products and accessories for BMW R 12 G/S (2025-).
Among universal products, here you can find the following example Accessories – depending on availability for your bike:

C-Bow carrier & luggage Sidecarrier for your R 12 G/S
Protection & Crash bars for BMW R 12 G/S
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting tankring to your new tank bag for R 12 G/S

As well as many more comfort and accessory items for your motorcycle!
Fitting Cases & Bags, Topcases and Tankbags etc. are also linked as related products for their relative carriers.

Handlebar riser with offset 30 mm high, 24 mm back, silver for BMW R12 G/S (2025-)

With the help of handlebar risers and handlebar risers with offset, you can adjust the seating position on the motorcycle to suit your needs and thus ride more relaxed and comfortably. The handlebar risers and handlebar relocations fit seamlessly and unobtrusively into the overall line of the motorcycle.easy to installNaturally TÜV tested and including ABEhigh qualitydifferent versions depending on the model: spacers or sleeves under the handlebar clamps; handlebar risers under the handlebar for use with the original upper clamp; handlebar risers with lower and upper clamp

From £128.79* £143.10* (10% saved)

Details

10 %

LED Auxiliary headlights "Nova" - Set for Ø18-25mm Crashbars | Motorcycle Foglights Kit with universal mount

With the Nova LED additional headlight set from HEPCO&BECKER you get everything you need to improve the visibility and safety of your motorcycle. This set contains powerful LED additional headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED additional headlights not only offer improved illumination of the road, but also give your motorcycle an attractive look. Easy installation is made possible by the included universal mounting set and cable set. Increase your safety and add an attractive design to your motorcycle by using the HEPCO&BECKER LED additional headlight set Nova. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K12 volts, per headlight 25 watts ECE tested and approved, therefore no individual approval is required (observe country-specific legal regulations for installation) Improved traffic light conditions Universal attachment to engine or tank protection bar with tube Ø18mm – Ø25mm, can be attached standing or hanging Complete headlight set; Incl. 2x LED additional headlights, 1x switch, 1x cable set, 2x clamp incl. reducing sleeves, 1x instructions, 1x tool set Connection is only via the battery, no connection to the vehicle wiring harness is required No external operation by third parties, thanks to a special control unit with automatic voltage controlWaterproof and dustproof to IP67Headlights can be flexibly switched on using the switch on the handlebarsNote: The lights can only be switched on approx. 5-15 seconds after the engine has been started. A voltage of 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually using the switch. The NOVA LEDs continue to light up until the voltage limit of 11.8 V is reached, even after the engine is switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When switching on again (wait for the time limit of control unit), the voltage limit of 13.1 V is queried again.

£241.56* £268.40* (10% saved)

10 %

Engine protection bar black for BMW R 12 G/S (2025-)

Whether you ride more on rugged terrain, on country roads or in town; a Hepco&Becker guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.Hepco&Becker protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info

£241.56* £268.40* (10% saved)

10 %

Engine protection plate black for BMW R 12 G/S (2025-)

Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.Hepco&Becker skid plates not only make your bike look great, they also enhance the off-road-look.solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories

£233.76* £259.73* (10% saved)

10 %

Additional engine protection plate expansion black for BMW R 12 G/S (2025-)

Black additional plate Perfect addition for extra protection and styleElegant black finishProvides additional shielding and protection for the engineTailored for your bikePrevents damage from stone chips, dirt, and adversitiesEasy installation with included mounting materialFollow the provided installation guide for smooth attachmentIncluded in the package: Black additional plate and necessary mounting material

£72.20* £80.22* (10% saved)

10 %

Handle guard set black (left+right side) for BMW R 12 G/S (2025-)

Both when driving off-road and on asphalt, the Hepco&Becker grip protection ensures reliable protection of the driver's hands and the motorcycle handlebars. powder-coated solid tubular steel construction Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please note the installation instructions and the vehicle-specific information

£144.39* £160.43* (10% saved)

10 %

Headlight grill for BMW R 12 G/S (2025-)

A flying rock or a short off-road-trip can destroy an expensice headlight. Our Hepco&Becker headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare

£89.37* £99.30* (10% saved)

10 %

Kardan Protection for BMW R 12 G/S (2025-)

Safe Hepco&Becker protection for the cardan.Made in GermanyExtremely stable construction Mounting on existing screw points includes mounting material and instructions

£112.79* £125.32* (10% saved)

10 %

Engine guard extension kit for BMW R 12 G/S (2025-)

Engine guard extension kit for BMW R 12 G/S (2025-) Scope of delivery: Extension kit + mounting hardware + installation instructionsRequired for combining the Hepco & Becker engine guard (item 5016546 00 01) with the original cylinder head cover.

£42.93* £47.70* (10% saved)

10 %

Kickstand enlargement for BMW R 12 G/S (2025-)

Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available! More than 100% larger surface area Safe stand of the machine on all surfaces Oxidation-proof black anodised

£46.44* £51.60* (10% saved)

9.99 %

Tankring BASIC incl. fastener for tankbag for BMW R 12 G/S (2025-)

Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.

£37.47* £41.63* (9.99% saved)

10 %

Tankbag Epic 11 Belt

Universal fit thanks to the flexible belt connection. For models for which we cannot offer a model-specific tank ring. Dimensionally stable thanks to high-density EVA foams, tear-resistant Hypalon and 840D ballistic polyester. Lockable zippers Robust handle Water-repellent outer material Additional compartments with a mesh compartment inside the lid Small reflective details for better visibility in traffic Removable, waterproof inner sack with roll top closure - easy to remove with snap fasteners Volume expansion through all-round zipLoops on the tankbag for attaching optional, individual accessories such as the Hepco & Becker card / smartphone case

£124.10* £137.89* (10% saved)

10 %

C-Bow sidecarrier for BMW R 12 G/S (2025-)

C-Bow sidecarrier for BMW R 12 G/S (2025-) The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler. Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft. The bags are attached securely to the motorcycle and stay in position even when loaded. On many models, the turn signals stay in their original position. Please check the manual for more info. Special carrier only for Hepco&Becker C-Bow bags and boxes Regular Hepco&Becker hard luggage does not fit Krauser K-Wing luggage does not fit High-quality surface finish Delivery: right side, left side, mounting kit, manual Easy mounting Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info) Rear rack enlargements can possibly restrict the function of the bags Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators. When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.

£195.12* £216.80* (10% saved)

10 %

Side carrier Cutout black for Xplorer Cutout cases 40/37 for BMW R 12 G/S (2025-)

Sidecarrier Cutout for BMW R 12 G/S (2025-)Features carrier:Adventure-proof, weather-resistant and firmly screwed side case carrier made of stainless steelsandblasted and electropolished surface finishScope of delivery: left + right + mounting material + instructionsonly the Xplorer cases 40 Cutout and 37 Cutout can be attached to this carriernormal Xplorer cases and other Hepco&Becker cases do not fit

£288.40* £320.44* (10% saved)

10 %

Sidecarrier Cutout incl. Xplorer sideboxes silver for BMW R 12 G/S (2025-)

Sidecarrier Set for BMW R 12 G/S (2025-) Cutout incl. Xplorer sidecasesSet of a model-specific, stainless steel sidecarrier on both sides in combination with a Xporer 40 liter and a recessed Xplorer 37 liter case including key, cylinder and the required lock adapters to attach the cases to the carrier Features Xplorer Cutout Set: recessed 37 liter side case on the muffler side 40 liter side case on the other side high-impact plastic and anodized aluminum sheets in the composite incl. keys and cylinders absolutely watertight wide range of accessories available Features sidecarrier stainless steel: adventure-compatible, weather resistant and firmly bolted sidecarrier made out of stainless steel powder coated incl. mounting material and manual

£1,006.06* £1,117.85* (10% saved)

10 %

Sidecarrier Cutout incl. Xplorer sideboxes black for BMW R 12 G/S (2025-)

£1,045.10* £1,161.22* (10% saved)

10 %

Easyrack topcasecarrier black for BMW R 12 G/S (2025-)

The Hepco&Becker Easyrack is especially designed for our topcases. As the successor to the luggage rack made of round tubing, the Easyrack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker topcases, wether aluminium or plastic and choose freely from the whole product line.Every Easyrack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Easyrack great strengt and an elegant look. The Easyrack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the topcase (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Easyrack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker TopcaseAttention: Hepco&Becker Topcase with an universal plastic adapter plate and the Orbit Topcase do not fit. Only the normal Hepco&Becker Topcases with a metal look on the bottomcan mostly be combined with C-Bow sidecarrier or normal hard lugagge sidecarrier: Please check manual or bike specific infoDifference to the Alurack topcasecarrier: the bow which can be folded down on the Easyrack stands rigidly upwards on the Alurackbike specific main frame is mostly the same at Alurack and Easyrack

£239.22* £265.80* (10% saved)

10 %

Alurack top case carrier black for BMW R 12 G/S (2025-)

The Hepco&Becker Alurack is especially designed for our top cases. As the successor to the luggage rack made of round tubing, the Alurack continues the tradition and is offered for later-generation motorcycles. This means you can attach nearly every Hepco&Becker top cases, wether aluminium or plastic and choose freely from the whole product line.Every Alurack is developed for the specific model and fits beautifully into the motorcycles overall look. Production from premium aluminium gives the Alurack great strengt and an elegant look. The Alurack design integrates additional luggage belt fastening points for attaching baggage rolls etc.recommended load: 5kg into the top case (please check manual and motorbike manufacturer for special info)Delivery: bike specific main frame, Alurack adapter, mounting kit, manualNo additional adapters needed for mounting a Hepco&Becker top caseAttention: Hepco&Becker top case with an universal plastic adapter plate do not fit. Only the normal Hepco&Becker top cases with a metal look on the bottomcan mostly be combined with C-Bow side carrier or normal hard lugagge side carrier: Please check manual or bike specific infoDifference to the Easyrack top case carrier: the bow which stands upwards for the top casemounting is rigidly fixed. Easyrack bow can be folded down.bike specific main frame is mostly the same at Alurack and EasyrackIf you want to mount Alu top case Standard 35, you need a special bow adapter: 700007351 or 700007350

£215.81* £239.79* (10% saved)

10 %

Tube rear rack black for BMW R 12 G/S (2025-)

The classic tube rear carriers from Hepco&Becker are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction made of German quality steel, HEPCO&BECKER tube topcasecarriers ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If necessary, soft luggage can be easily secured. The tube luggage rack offers many options for this. If there isn't enough space, the rack can be combined with the Hepco&Becker universal rear rack enlargement. Recommended load: 5kg (Please note the model-specific instructions for the respective rack, as well as the motorcycle manufacturer-specific specifications Can usually be easily combined with side case carriers or C-Bow sidecarriers (see manual) Includes installation material and mounting instructions MADE IN GERMANY Not suitable for topcases, only suitable for soft bags!

£206.44* £229.38* (10% saved)

10 %

Smartrack soft luggage rear rack for BMW R 12 G/S (2025-)

The slim, light and inconspicuous luggage solution from Hepco&Becker. The Smartrack offers a way to individually attach soft luggage to the rear of the motorcycle. A backpack or bag can be lashed through side slits. A backpack or bag can be secured using the side slots. Our rear bags with the Basic System can also be easily attached using an exchangeable module.suitable for rear bags with Basic fastening adapteradaptableincl. mounting kit and manualan ABE or registration is not necessaryhigh-quality powder coatingsolid construction

£211.90* £235.45* (10% saved)