Here you will find model-specific products and accessories for BMW R 12 (2024-).
Among universal products, here you can find the following example Accessories – depending on availability for your bike:
C-Bow carrier & luggage Sidecarrier for your BMW R 12
Protection & Crash bars for BMW R 12
Luggage racks and top case carriers like the Easyrack or Alurack
Specific solutions like our Sportrack or Smartrack for the rear
The mounting tankring to your new tank bag for BMW R 12
As well as many more comfort and accessory items for your motorcycle!
Fitting Cases & Bags,
Topcases
and Tankbags
etc. are also linked as related products for their relative carriers.
Whether you ride more on rugged terrain, on country roads or in town; a Hepco&Becker guard is always the right choice. Your motorcycle is always effectively protected against an unexpected mishap.And even more: If the bike falls over or makes unintentional contact with the ground, it can protect both, bike and rider from more serious consequences.Hepco&Becker protection bars follow the lines of the bike perfectly, giving it a customized appearance. Made with extremely stable tube-in-tube construction. Depending on the vehicle model, various surface finishes are available.protection during pushovers or fallshelps, when tying up the motorcyclepremium surface finisheasy assemblydelivery: right side, left side, mounting kit and manualhigh quality german steel tubeplease check manual or bike specific note for more info
Black additional plate Perfect addition for extra protection and styleElegant black finishProvides additional shielding and protection for the engineTailored for your bikePrevents damage from stone chips, dirt, and adversitiesEasy installation with included mounting materialFollow the provided installation guide for smooth attachmentIncluded in the package: Black additional plate and necessary mounting material
Even a sidewalkd can mean rough contact with the ground and can damage the engine housing. This skid plate protects the manifold and engine block from even the most violent ground contact or rock impact.Hepco&Becker skid plates not only make your bike look great, they also enhance the off-road-look.solid aluminium skid plate MADE IN GERMANYincl. manual3-4mm thick aluminium platebike specific developmentprecisely manufactured, adapted to fit the engine and exhaust system of each specific bikeplease also check manual or bike specific info, if you want to know compatibility with original or other accessories
A flying rock or a short off-road-trip can destroy an expensice headlight. Our Hepco&Becker headlight grill keeps the light protected and also adds an great off-road look.adapted to the design of the bikeeasy assemblyblack powder coatedsolid steel constructionno reflections or danger of self-produced glare
Safe Hepco&Becker protection for the cardan.Made in GermanyExtremely stable construction Mounting on existing screw points includes mounting material and instructions
Engine guard extension kit for BMW R 12 (2024-)Scope of delivery: Extension kit + mounting hardware + installation instructionsRequired for combining the Hepco & Becker engine guard (item 5016539 00 01) with the original cylinder head cover.
Just fully packed, or on unstable ground, the motorcycle threatens to sink easily on the side stand.A precisely shaped milled spreading plate, which is quickly screwed to the side stand and freed from this dangeris now available!
More than 100% larger surface area
Safe stand of the machine on all surfaces
Oxidation-proof black anodised
Simple and innovative at the same time - the BASIC tank ring This functional tank ring allows you to attach a tank bag from Hepco&Becker.The scope of delivery includes a BASIC tank ring, as well as the fastener for tankbags, which can be individually screwed to the tank bag, depending on the shape of the tank and the angle of the handlebars. The tank cap can still be opened with the tank ring mounted without any problems. In general, all you need is this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the shop to find out manually whether a universal tank ring is available for the desired model. (See main menu -> tank rings BASIC)Characteristics:absolutely secure hold, even at high speedsmechanical lockingeasy handlingthe Hepco&Becker tank bag is simply put on and locks audibly on the tank ring thanks to a sophisticated mechanismunlocking: The mechanism is unlocked by a lashing strap in the direction of travel at the front of the tank bag; the tank bag is simply removedsimple but effective mechanicsrecommended maximum speed with the tank bag installed: 130 km/h (Please note the motorcycle manufacturer's information, as well as the model-specific information on the instructions or here with the productrecommended load in the tank bag: approx. 3kg In Germany, tank bag systems do not require an ABE or entry in the papers.Difference between Lock-it and BASIC tank rings:The general function and operation remains the same. Compared to the Lock-it tank ring, however, the Basic tank ring only locks mechanically. The magnets of the Lock-it tank ring help with centering. The difference lies purely in the two magnet or plastic domes, which are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions.A notice:A tank bag with a Lock-it holder cannot be placed on a BASIC tank ring and vice versa. Tank bag holder and tank ring must be from the same system.
C-Bow sidecarrier for BMW R 12 (2024-)
The C-Bow bag holder is made to take a variety of Hepco&Becker bags, depending on the motorcylce model.
Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder.
Its elegant, unobtrusive design fits perfectly into the vehicles overall lines. Naturally, it keeps saddlebags safely away from the hot exhaust muffler.
Modern C-Bow technology allows the right bags to be attached simply and easily to the C-Bow with a single click, firmly locking them to deter theft.
The bags are attached securely to the motorcycle and stay in position even when loaded.
On many models, the turn signals stay in their original position. Please check the manual for more info.
Special carrier only for Hepco&Becker C-Bow bags and boxes
Regular Hepco&Becker hard luggage does not fit
Krauser K-Wing luggage does not fit
High-quality surface finish
Delivery: right side, left side, mounting kit, manual
Easy mounting
Can usually be combined with topcasecarriers, sissybars or solo racks (please check the manual and bike specific info)
Rear rack enlargements can possibly restrict the function of the bags
Developed for the machine's stock condition. Not tested with accessories such as exhaust, license plate holder or other indicators.
When using third-party accessories, make sure that the bags are always kept at a sufficient distance from the exhaust and that the indicators have a sufficient beam angle.
The exhaust jet must not be directed at the bags.
The classic tube rear carriers from Hepco&Becker are model-specific and only fit on the listed motorcycle on the mounting instructions. Thanks to the construction made of German quality steel, HEPCO&BECKER tube topcasecarriers ensure maximum strength and very high safety. Thanks to the high-quality coating and the proper care, the look is preserved in the long term. If necessary, soft luggage can be easily secured. The tube luggage rack offers many options for this. If there isn't enough space, the rack can be combined with the Hepco&Becker universal rear rack enlargement.
Recommended load: 5kg (Please note the model-specific instructions for the respective rack, as well as the motorcycle manufacturer-specific specifications
Can usually be easily combined with side case carriers or C-Bow sidecarriers (see manual)
Includes installation material and mounting instructions
MADE IN GERMANY
Not suitable for topcases, only suitable for soft bags!
On motorcycles with a divided seat. The passenger seat is replaced with one of these fantastic Hepco&Becker Soloracks. Available for many models. A solorack makes it easy to take small luggage with you and fasten it securely. Our product line also includes an attractive solorack handheld bag. (Liberty Handbag for Soloracks: 620995) made to our quality standards - the perfect addition.custom designed for each bikesturdy, elegant designquality German steel tubing with premium high-gloss chrome platingprecise manufacturingeasy assemblyincl. assembly instructionrecommended load: 5kg (please check manual or bike specific infos)
