Engine guard "Solid" black for Husqvarna Norden 901 / Expedition (2022-)
Product information "Engine guard "Solid" black for Husqvarna Norden 901 / Expedition (2022-)"
Engine protection: Crash bar for Husqvarna Norden 901 / Expedition from Hepco & Becker
Whether you prefer to ride off-road, even in difficult terrain, freely on the country road or spend most of your time in the city, a motorbike crash bar is no longer a beginner's accessory.
Developed for a wide range of motorbikes, our crash bars fit perfectly into the existing lines of your Husqvarna Norden 901 / Expedition and give the motorbike a characteristic look,
but more than just that: in the event of a crash or unintentional ground contact, our motorbike crash bars also protect the rider from more serious damage!
Crash bars from Hepco&Becker are the right choice for all individualists who value safety and quality.
Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad.
Exclusive look thanks to high-quality surface finish: High-quality powder coating from Germany.
And last but not least, motorbike crash bars also offer you many other options for additional comfort, for example you can attach our protective bar bags to them, or our additional/fog lights.
On top of this, motorbike crash bars are incredibly well suited for securely lashing your bike to a trailer if you ever need to transport it.
Features & details:
- Material: Tubular steel made in Germany
- Surface finish: High-quality powder coating
- Colour: Black
- For model year(s): 2022-
- Provides effective protection in the event of minor accidents or mishaps
- Extremely helpful when lashing the motorbike, e.g. on trailers
Scope of delivery:
- Engine guard for Husqvarna Norden 901 / Expedition left
- Engine guard for Husqvarna Norden 901 / Expedition right
- Screw set (incl. spacers, sleeves, washers etc.)
- Multilingual, comprehensive illustrated assembly instructions
Important notes:
- No ABE or registration is required for this product if installed as intended
- Please observe the model-specific information listed in the installation instructions and properties!
- Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorbike!
- For safety reasons, all mudguards should be adequately checked after a crash and replaced if necessary.
- If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
We offer special conditions for official driving schools. Please contact our customer service at (+49) 0 6331 / 1453 - 222
| Model-specific information: | Not suitable with the mudguard kit (original accessory). |
|---|---|
| Brand: | Husqvarna |
| Model: | Norden 901 / Expedition |
| Year of production: | 2022, 2023, 2024, 2025, 2026 |
| Color: | black |
Zubehör
only suitable for tank and engine protection bars with a tube diameter of 22 mm and 25 mm scope of delivery: 2x Sidepad, fastening materialeasy, safe and quick assembly, universal attachmentadditional protection against impact and abrasion damageincreases effectiveness of a protection barmaterial: heavy-duty plastic, impact/shock absorbing, friction resistance due to component geometryprogressively increasing frictional resistance shortens the gliding phase in terms of time and space over longer periods of contact with the roadeasy to replace in case of damage
Let there be light! Motorbike auxiliary headlights LED NOVA With the Nova LED auxiliary headlight set from HEPCO&BECKER, you get everything you need to improve the visibility and safety of your motorbike. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorbike an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorbike by using the HEPCO&BECKER LED motorbike auxiliary headlight set Nova. The brand new LED auxiliary headlight Nova - the next step in lighting technology. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K 12 volt, 25 watts per headlight ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation) Improved lighting conditions in road traffic Universal mounting on engine or tank protection bracket with Ø18mm - Ø25mm tube, can be mounted upright or suspended complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set Connection only via the battery, no connection to vehicle wiring harness required No third-party operation thanks to special control unit with automatic voltage control Waterproof and dustproof to IP67Headlights can be added flexibly via the switch on the handlebarsPlease note: The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the wiring harness to enable the circuit . In older vehicles, this can be achieved by briefly increasing the speed. Switching off must be done manually at the switch. The NOVA LEDs remain lit until the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when falls below this voltage limit do the lights switch off automatically via the control unit. When switching on again (wait for the dwell time of the control unit), the voltage limit of 13.1 V is queried again. Download FAQ as PDF
Manufacturer: Marston-Domsel GmbH Factory No .: MSS.585.F10-BK highly viscous · medium strength · removable · for all threaded metal connections · prevents breakage due to vibration, e.g. on gearboxes, motors, etc. · slightly oil-tolerant · connection can be released with normal tools · DVGW release · NSF P1 registered (Reg. No. 154175) · max. Thread: M36 · gap filling capacity: 0.25 mm · breakaway torque: 17-22 Nm · temperature resistance from -55 ° C to +150 ° C ·Additional technical characteristics Gap bridging max .: 0.25mm · Color: dark blue · Breakaway torque: 17-22Nm · Certification: NSF P1, DVGW Brand: MARSTONContent: 20 gThread: max. M36Strength class: mediumTemperature: -55 to +150 ° CViscosity: highly viscousPackaging: Bottle
Content: 0.02 Kilogramm (£455.00 / 1 Kilogramm)
for repairing minor paint damage on powder-coated surfacesscope of delivery: 1x brush bottle with the corresponding shadepre-treatment: the surface must be clean, free of rust and grease. Sanding of the surface may be necessary.properties after drying: After the drying time, the color corresponds approximately to the original powder coating color. The degree of gloss underlies small fluctuations. Larger effect deviations must be expected with metallic shades.